New Years Eve Decorations

Hello again and Happy Sunday.

It’s New Years Eve tonight (Yay) and that is a special occasion around my house. My hubby and two boys are more excited for this evening than for their Birthday or even for Christmas. So naturally we make a big deal out of it – even if we’re only 4 or 5 people around to celebrate it.

Every year I make decorations for New Years Eve and some is kept for next year and some don’t survive (yes it gets pretty wild around here)

This year I set my eyes on the new Candles in Three Sizes for LED Tea Lights from an upcoming kit from SVG Attic. Watch for it in a set next summer for early Christmas crafting. You can also find the Candles in the Snapdragon Snippets store or in the Silhouette Design Store.

DSC_0009

These are very easy to make and I made all three in a jiffy. I decided, that since they are meant as decor for New Years Eve, I not only wanted them to be candles but to look like small crackers/fireworks as well. The little “fuse” or paper flame is included with the candles and is simply assembled by rolling it on a pencil or something similar and gluing the tube together. Then curl the long strips. I just put it over the LED flame but you can also glue it inside the candle hole.

I made the candles in AC Cardstock in Black and decorated them with AC POW glitter paper with a chevron pattern in silver.

And what is New Years Eve without  Champagne or Champagne glasses?

So I made two 3D Champagne Glasses from the JGW New Years Celebration kit

DSC_0002

I didn’t use acetate on mine or decorated them with gems or stones but kept them in the same color scheme as the rest of my decorations: Black, White and Silver. I don’t plan for using them for candy but I might use them as candle holders – a LED Tea Light fits perfectly in them.

I used AC Cardstock in White for the glasses and decorated them with AC POW glitter paper in Silver and Black. On the top of the glasses I put some glitter washi tape from my stash.

I must say that these were also very easy to make. The trick is to use a pencil or wooden dowel inside the stem as it helps to hold the top onto the stem and makes it more sturdy.

But wait…..there is more 😀

Next is the Rocket Lantern from Dreaming Tree.

DSC_0007

This was very easy to make and I didn’t change much except the colors, left out the pipe cleaners and added some extra stars.

It is made from AC Cardstock in Black and decorated with AC POW glitter paper in Silver. I added a color shifting LED light into the rocket and it’s ready to fly 😉

Then I made a banner:

DSC_0007

This one I found in the Silhouette Design Store (design #64583) and it’s designed by Lori Whitlock. I just love the intricate design – almost looks like lace and I found it perfect for my New Years Eve decor. It’s written in Danish and says “Happy New Year” 🙂

I made it in Black AC Cardstock and backed it with silver glitter paper – don’t you think it’s unbelievably beautiful? This one can last some years as I didn’t write any numbers on it 😉

Instead I made those numbers  – 2018 – from Lori’s 3D Simple Numbers that also found in the Silhouette Design Store (#125495)

DSC_0011

I stayed true to my color scheme and made them in AC Cardstock in Black and White along with POW Silver glitter paper. My intention is to let a LED Light String run through the letters for some extra attention 😉 I also think I might have to use a pop dot to hold them upright through out the night 😉

I also made a bottle tag 😀

DSC_0004

This one can also be found in the Silhouette Design Store (design #239620), is designed by Daniela Moscone and is very straightforward to make. I used pop dots on the 1 and the 0 for some effect.

It’s made of AC Cardstock in White and Black along with POW glitter paper in Silver and Black.

Finally I made place cards and these I also found in the Design Store (design #238336) and they are designed by Studio Ilustrado.

DSC_0013

I altered them a bit by removing the clock and making the zero in several layers to make a shaker card effect and used some black glitter along with silver stars inside. The card itself is also made from AC Cardstock in Black and White with POW Silver glitter paper.

I hope I can show you some before and after shots of the table and the decor (so you can see the mayhem and destruction 😀 )

Well that was what I had to show you today. I wish a Happy New Year to all of you and hope to see you a lot more in 2018

Update:

The promised before and after shot:

I’m Dreaming Of A White Christmas…..

….or even one in rainbow colors 😉

No seriously! It has been a looooong time since we’ve had a white Christmas here in Denmark and I really long for the white gold. But so far all we have is grey, windy and chilly weather. Yuk 😦

So I have to escape to fantasy land to get my White Christmas. What luck that you can find just that at 3dcuts.com. Last Christmas I decorated my table with the cute little white houses but this year Marji Roy made a Hexagon Base to display the little winter town. I got my base at 3dcuts.com but all the little houses in the Silhouette Design Store. I do have to mention that the Skating Rink is not part of the Tea Light Village but one I found in the Silhouette Design Store (#102105) and I sized it down to match the houses.

So here it is:

DSC_0011

The entire town is made from White AC Cardstock. I did spray the base and the roofs with some glitter but it’s hard to see in the pics.

My display is made for my dresser so I didn’t have to worry about the backside of it.

I also a string of fairy lights and I went with multicolored…..This was a great decision! Just look how pretty it is lit at night:

DSC_0004

Now my little town has really come to life and my dream of a white and a rainbow colored Christmas has come true.

Here are some more pics of the lit town:

Thanks for joining me today – please remember to leave a little comment for me ❤

Skellington on a Stick

Hello – hope you’re having an amazing Tuesday today 🙂 Mine’s been pretty lazy so far but I guess soon I’ll have to go stretch the old bones and go for a walk.

Talking about bones….I was so inspired by Annita Kristine Schøtt Pedersen’s cute snowman on the SVG Attic Fanatics FB page yesterday, so I had to make one myself. I don’t know how the idea popped into my head, but I realized that I wanted to make him into Jack Skellington from “The Nightmare before Christmas”

DSC_0005

He is made from the Spring Spiral Snowman from the  JGW Made of Snow kit. All I had to alter was the face (found one in the Silhouette Design Store #156604), make the butterfly by welding two bats from the Silhouette Design Store (found here and here) and draw some white lines with a Sharpie.

I also cut some “hands” in white and added to the arms on both front and back and finally I made a button from the skeleton on the Mourner’s Hat from JGW Raven Quest.

I used AC Cardstock in Black and White along with AC POW Glitter paper in Charcoal and a tiny bit of black floss for the button.

Thanks for stopping by and remember to leave that little special comment for me to read 😉

New to SVG Attic?  Check out these awesome places!

SVG Attic Website

SVG Attic Facebook Page

SVG Attic Blog

SVG Attic Pinterest

 

Dun Dun Dun Dun …….

….we all know this tune! You know – the Theme from Jaws! A fitting soundtrack for my tiny post today 😀

The other day when I posted the Acorn Shaker, Team Member Lee Cox mentioned her idea of making a shaker card from the latest collection by Bird – Jawsome but she didn’t have the time for it, so she gave the idea to me. Trying my best to honor her wicked idea, here is what I came up with:

DSC_0002

I used the shark from the Shark Window Card and made it into a shaker card by adding 7 layers behind the front layer with the acetate. I removed the teeth on the back layers to give more room for shaking and made two front layers with teeth – one in red and one in white – to give the impression of bloody teeth. I also cut out tiny fish skeletons in white pearl paper and added a bit of red ink to make them look bloody 😀

The background paper I found in the Silhouette Design Store but any sea or wave paper could do.

The card is a freebie from the Card Bundles – the Pop-Up Slider Card from Card Bases. I added the green panels (they are actually the same olive green as the background) to give it a little extra and cut the text from red cardstock in a blood dripping font 😀

Finally I tied some red, white, grey and black raffia onto the slider (doesn’t show in the picture 😦 ) and added two small black pearls as eyes.

Here’s a little close-up:

DSC_0007

Yummy!!!!

Thanks for stopping by to witness the twisted and bloody mind of mine (and Lee Cox’s) and don’t forget to tell what you think of this bloody fish-eating shark card 😀