Steampunk Teapot Luminary

Hello – so glad you have time to visit me today.

I want to show you the project I just entered in Dreaming Tree Summer Challenge – the Steampunk Teapot Luminary:

DSC_0001 - Kopi

For this project I used AC Cardstock in Chestnut, Peacock, Peach, Grapefruit, Black and Grass along with patterned paper from Graphic 45 “Imagine”, gold vellum, gold pearl paper and printable vellum.

The project consists of several Dreaming Tree files.

The Teapot itself is from the Cozy Kitchen SVG Bundle. I removed the patterned on the front of the pot and added the clock and gears instead using several techniques on my Silhouette Cameo like (un)grouping, welding etc.

The top and bottom in Peacock are embossed with a Tim Holtz embossing folder with cogs and gears and then I rubbed some Opal Magic Wax in Turquoise Satin from Prima on them.

DSC_0005 - Kopi

The Clock is from Dogwood Mantle Clock from the Making Time SVG Bundle. I used only the clock itself and added some gold vellum behind it. As my clock work is too large to be hidden behind the black clock face, I decided to put in a piece of cardstock to block the light from within in the middle to make it look a lot better. The light still shines through the outer golden rim.

On the back of the teapot, I put in the hatch from the clock for easy access to the light source and to change the battery in the clock.

The cogs and gears are from the Tick Tock Clock from the Making Time SVG Bundle and I used only these. They are made larger or smaller to fit my needs and I put gold vellum underneath where I’d made holes for the light to shine through.

DSC_0007 - Kopi

The Butterfly is from the Butterfly Paper Sculpture from the Paper Sculptures SVG Bundle and I switched out the flowers on the wings with cogs and used a piece of printable vellum to add a transparent ombre color scheme.

DSC_0009 - Kopi

Finally I made lots of small and larger roses from the Floral Arrangement from the Alluring Florals SVG Bundle. I rubbed the edges of the ones in cardstock with Aged Brass Metallique Wax from Prima and added gold glitter to all of them including some on the leaves as well – oh and on the butterfly too 😉

DSC_0006 - Kopi

Lastly I decorated the whole project with different cogs and gears from Tim Holtz along with several trinkets from my stash.

This was such a fun project to make – from getting the idea (I was inspired of the darling teapot clock on the Graphic 45 paper) to finally executing the whole thing. I just love when an idea succeeds 🙂

futuristicfantasy

Now wish me luck – there are a lot of awesome entries in the challenge…oh and please leave me a small comment if you like my entry.

 

50 shades of …..

RUST 😉

Hello – so glad you chose to visit my blog today 🙂

Just popping in with a small post, to show you the cute, fun and awesome not to mention vintage Pickup Truck from Simply Crafty Svgs, I made last night:

DSC_0007

This adorable pile of rust is made from AC Cardstock in Cranberry, Black and White and decorated with Silver Mercury Glass Cardstock from DCWV.

The headlights are two large gems from my stash that just fitted perfectly and the license plate is made using the Silhouette Sketch pen function with my Silhouette Cameo.

Here’s a rear view:

DSC_0010

The tail lights are also two gems from my stash. The back end is decorated with a panel embossed with a Cuttlebug Embossing folder.

And a sideview:

DSC_0011

To achieve the rusty look, I rubbed some Copper Metallique Wax on all edges and smudged on here and there too.

This truck is surprisingly easy to make – just follow along the great tutorial video Sandy of Simply Crafty Svgs made.

Such a truck needs loads of gas, so I had to make the  Vintage Gas Pump from Cre8tive Cutz too:

DSC_0003

For this I used AC Cardstock in Pomegranate, Black and Vanilla along with a dark grey Bling Cardstock from Bazzill. This too was smudged in Metallique Wax

DSC_0005

The hose is a piece of Hemp cord from my stash – I just love these small awesome details on the pump ❤

And here they are together:

DSC_0002

This was a really fun and easy project to make. The truck was a bit time consuming but it has the coolest details and I really encourage you to have a go! So much more easy than it looks. Just imagine this one for Autumn with pumpkins in the back or for Christmas – driving home with the tree 😉

Thanks for stopping by today – hope you enjoyed the pictures and that you are inspired to go make your own now 🙂

 

Fish for Father

Hello again – I’m so happy to see you 🙂

Today it’s all about Father’s Day and fishing. These two go together like horse and carriage in most families – just not in mine. I mean my Dad was fond of fishing but my hubby does not want to go anywhere near a pond or hold a pole in his hand (he’s so weird) Me, on the other hand, has a great love for fishing. It’s so relaxing and exciting at the same time and the quiet around the pond – ahhhh just love it. Only problem I have, is getting the fish off the hook. YUK! I cannot touch the darn thing or kill it. So that’s where I need hubby to tag along when we go fishing. My boys are just as screamish as me so that leaves – Dad/Hubby.

Well I guess I had my own Dad in mind when I decided on making this project. In remembrance of him and all the fishing trips we took in my childhood.

Well enough with the yapping – here comes the good stuff:

DSC_0025

Every fisherman (or woman) needs a good basket or Creel to hold the fish he or she catches, and the Fishing Creel 3D Box from SVGAttic’s JGW Gone Fishing kit is just the thing.

I made it from AC Cardstock in Latte, Caramel and Coffee along with some silver pearl paper.

I also used Prima Metallic Wax Rich Copper on the edges instead of ink for a fun effect.

The brads, holding the handle and latch, are from Tim Holtz and the latch strap is made of faux leather from Cricut.

One also needs a good tackle box and the JGW Gone Fishing kit has that too:

DSC_0027

It’s made from AC Cardstock in Mint, Robbin’s Egg and Fireberry and decorated with patterned paper from a really old collection by Cosmo Cricket “Snorkel” (just because I loved the fishies)

The edges are inked with Ingvild Bolme Chalk Ink, the brads are from Tim Holtz and so is the tiny tag with the fitting sentiment on it.

Both of these boxes were so easy to make. Just follow the instructions from Jodi here and here.

What’s a fisher with out a good hat?

DSC_0029

This cute Fisherman’s Bucket Hat Favor Box from SnapDragon Snippets is a necesity for the fisher as it holds several hooks, bobber, lure and fly and it can hold treats as well.

I made it from AC Cardstock in Olive, Robbin’s Egg, Black, Fireberry, Cranberry, Vanilla and Truffle along with patterned paper from another oldie by Cosmo Cricket “Mr Campy”.

I also used some sienna colored eyelets and some scrapper floss in tan and all the edges are inked with Ingvild Bolme Chalk Inks. The tag is one I made using the Print ‘n Cut function on my Silhouette Cameo.

This one is a bit more tricky to make but not difficult at all – just more parts to keep a hold of.

How about the Fisherman himself?:

DSC_0021

This good looking fellow is the Fisherman Canister from SVGAttics JGW Summer Canisters kit. He is made from AC Cardstock in Olive, Caramel, Mint, Coffee, Robin’s Egg, Peacock, White, Vanilla, Black, Fireberry, Cranberry, Rosebud, Blush, Latte and Leaf along with patterned paper from the “Mr Campy” collection and Tungsten Bling Cardstock from Bazzill.

I also used eyelets on the hat and scrapper floss to hang the bobber on his vest and all edges are inked with Ingvild Bolme Chalk Inks.

Super fun and super easy to make.

Finally, to top it all of, is a card:

DSC_0023

This card is also included in the JGW Gone Fishing kit from SVGAttic and is called “Fishing Vest Card”

I used AC Cardstock in Caramel, Truffle, Coffee, Cranberry, Fireberry, Black and Vanilla along with patterned paper from the “Mr Campy” collection and Tungsten Bling Cardstock from Bazzill.

I was lazy (in reality I’m just really horrible at sewing) and drew the stitches onto the vest instead of sewing them using my Silhouette Cameo sketch pen.

All edges are inked with Ingvild Bolme Chalk Inks and dots are from Prima.

 

Luckily I managed to get the Fishing Pole 3D Magnetic Toy done too:

DSC_0011

Originally I had all the other things done but then I saw Jodi had made this magnificent Fishing Pole and I just couldn’t bear it not being a part of this Father’s Day set. The most cool thing about this one is that it actually works….Even my teenager is impressed!!!

It’s made from AC Cardstock in Fireberry, Coffee, Black, Cranberry and Vanilla along with the patterned paper from the “Mr. Campy” collection. The grip overlay is made from Tungsten Bling Cardstock from Bazzil along with the outer most layer of the left and right wheel layer.

Check out the assembly tutorial here

The Bobber is made from two halves that I glued together and wrapped some black washi tape around the middle.

DSC_0011 - Kopi

This is a very fun project to make. I really love how Jodi’s head works and how she makes her ideas come to life. Such cool mechanisms.

There you have it – the whole chabang (minus the Fishing Pole):

DSC_0031

I’m pretty sure my Dad would have loved this set and I really hope that you do too. I think I have to go out and find a Dad, that loves fishing, and give him this set – know anybody?

Thanks for stopping by today. Father’s Day is celebrated in Denmark on June 5th which is also our Constitution Day so a few days ahead of the US. So Happy Fathers Day to you on the 17th of June.

New to SVG Attic? Check out these awesome places!

The Wild West

We all know that finding something to make for a guy’s Birthday is tough. Usually most of the kits and files out there are cute, feminin or for kids. But Mary from SVGCuts just made it a whole lot easier crafting something cool for a man – with the amazing Wildflower Saloon Kit. I couldn’t keep myself from making most of the parts of the kit because it is just da bomb!!!

So first I made the Whiskey Barrel:

DSC_0010

I made mine in AC Cardstock in Caramel and Black and embossed all the panels with Darice Woodgrain Embossing folder. Then I inked all with different shades of brown ink pads from Prima Ingvild Bolme. On the rings I have rubbed Prima Metallique Wax in Rich Copper, Brushed Iron and Aged Brass and added some Tim Holtz brads.

Don’t be intimidated by the barrel – it is very easy to make!

Next I made the Cowboy Hat:

DSC_0013

This is downsized to 75% in order to keep the size ratio with the barrel. I made mine from AC Cardstock in Chestnut and tied some hemp cord around the top.

This is actually a box and it is so easy to make. I had it done in no time 🙂

Then there’s the Rustic Lantern:

DSC_0008

This amazing design is also downsized to 75% and is made from AC Cardstock in Coffee and some Vellum. All of the pieces are rubbed with Prima Metallique Wax in Bronze Age, Rich Copper and Aged Brass.

I can’t get the Darice light here in Denmark, so I put in a 20 piece LED sting of lights inside instead. Works just as well 🙂

This one is a bit more challenging to make (especially if you downsize it) but it’s nothing you can’t handle 🙂 Just takes a bit more time and Mary has a wonderful tutorial video for you to follow 🙂

Next I made a pair of Cowboy Boots – these are NOT from the Wildflower Saloon Kit but from an older kit called Happy Trails:

DSC_0015

The boots are also downsized to 75% and I used AC Cardstock in Chestnut and Coffee along with some silver pearl paper. I used a Damask patterned embossing folder from Cuttlebug on the panels and a Leopard Print embossing folder, also from Cuttlebug, on the inside panels. Then I used some Tim Holtz brads on the backstraps and top straps and inked the embossing with some dark brown Prima chalk ink.

Finally I made the adorable Trunk of Wildflowers Box Card:

DSC_0017

For the card I used AC Cardstock in Chestnut, Mint, Oregano, Moss, Rosebud, Vanilla, Melon, and Canary along with patterned paper from Graphic45s French Country. I also used some copper colored pearl paper for the hardware. On the handles I used Tim Holtz brads and on the hardware I used some copper colored brads I found in my stash.

I also decorated the flowers with different pearls and gems from my stash and inked all the edges with Prima Chalk ink (Ingvild Bolme).

This card looks difficult but it isn’t. Just follow the instructions on the PDF or watch Marys tutorial.

And here it is – in all its glory 😀 Yee Haw!

DSC_0006

I want to thank you for joining me today – it was so much fun to put these things together and I really hope you’ll make some of your own ❤

Halloweenish Urne

You know me. I just had to. Halloween is only 8 month away…..better get started on some projects to make it in time 😀

I realized that the Heart Shaped Lantern from Bird’s Truly, Madly, Deeply Collection kinda looks like an urne so naturally I thought of Halloween.

I changed out the pattern again like with the Moroccan Lantern I made and voila!:

DSC_0002

I found the skull pattern in the Silhouette Design Store ID #48665 and after a lot of modifying, welding and playing around, I was satisfied.

DSC_0004

The Lantern is made from AC Cardstock in Black and Shadow along with Vellum.

I rubbed some Prima Brass Metallic Wax onto the panels to resemble rust as if the urne was made of metal/iron.

DSC_0006

I also embossed the lid panels with a Cuttlebug embossing folder and finally I placed a color-shifting LED light inside.

DSC_0008

Come Halloween I’ll be ready 😀

Thanks for joining me today and please don’t forget to leave me a small comment ❤