The Secret Lives of the Cracked Chick

Ok so I had a lot of fun with the Cracked Chick from Simply Crafty Svgs even though I was only going to make a few for my Easter decorations. My vivid imagination took over and went insane. Not only did I make some funny Chicks but I had to make some funny pictures as well. They just might be manipulated a tiny bit 😉 oh and all chicks are downsized by 50%. No animals were harmed in the process 😉

My original idea was to make the chick in a few cute versions and one of them was a little girlie Chick. Just hatched and the remaining shell lying right beside her:

IMG_634611_InPixio_InPixio

Ok so she’s a bit cross eyed and properbly not your typical little cute Easter Chick but she loves colors and wanted to pose in a pile of feathers.

The bottom shell piece is made by enlarging the shell hat of the Chick and making it a bit longer. It’s just for show.

I used an embossing folder from Darice with a cracked pattern – perfect for a cracked egg shell.

I used a white sharpie to make reflexes in her eyes and nose and the flower is one I happened to have in my stash.

That’s when things got a bit out of hand. 😀

I noticed that the Sailor Hat from SCS would fit if downsized to the right measurement and if the Chick was a sailor, he would need a boat sooooo:

IMG_634711_InPixio

…he got a boat. Made from the Fishing Boat Box, I created a sail boat by adding a pole, sail and flag. These are found in the Silhouette Design Store ID #100976 by Snapdragon Snippets and ID #61978 by Carta Bella.

I used a wood grain patterned embossing folder for the panels and sanded them slightly to make the pattern show more. Then I added a net and some starfish from my stash along with the lifesaver and oars with comes with the Fishing Boat Box file.

Now he’s a happy little sailing Sailor Chick 😀

One of my original ideas was to used the Chef Hat also from SCS to make a Chef Chick but that didn’t work out as planned. The hat was too large for the chick but the top part of the hat fit and making the chick in brown like made out of chocolate…..

IMG_634911_InPixio

…. I had my very own Aladdin Chick on a Magic Carpet.

The Top part looks exactly like a Turban and the carpet I made for him, is found in the Silhouette Design Store (design ID #85512 by Studio Ilustrado) I just added a panel on top and bend it a bit here and there for the flying look. I used patterned paper from DCWV’s Luxe Lodge Stack.

Then I added a feather and a gem to the Turban and Aladdin was ready to fly.

So once again my imagination got to run wild and I’ve had a very fun evening and morning making these cuties.

Let me know in a comment below if you like these wacky chicks and I wish you a Happy Easter – thanks for visiting

Hanging Easter Eggs

Next week Easter begins and usually I decorate a bit for the Holiday but this year I can’t find my stuff after the move. So I figured I would make a thing or two this year.

My DT assignment this time was these two Easter Eggs made by Annie Collins (These are available via Anne Ingram in The Multi Crafters Craft Cafe Albums):

Easter_Eggs w watermark

I printed two sets out and colored them in with my Promarkers and then used the Print ‘n Cut setting on my Silhouette Cameo, to cut them out.

Then I made an offset of the eggs and cut out two of each in AC Cardstock.

I found two cute Egg Doilies in the Silhouette Design Store design ID # 40140 designed by Megan Hardy and cut both out of Pearl Paper in pastel colors matching those of the offset cutouts.

Finally I glued the digi stamps onto the offset cutouts and glued one on each side of the Egg Doilies and voila….two new hanging Easter Eggs.

One in pastel purple/pink:

Ophæng 1

And the other in Pastel blue/Ocean Blue:

Ophæng 2

These are pretty big but it’s very easy to downsize them so they could hang from a branch in your Easter Decoration.

Thanks for joining me today – please let me know in a comment if you liked this project and then I want to wish you a Happy Easter – stay safe.

 

Time for Celebrating

Honestly – I had another plan for this blog post today – as it’s April Fools Day but it didn’t work out as planned and I don’t think anybody is really in the mood for pranks this year. So I made some pretty projects instead 🙂

April has always been a busy month in my family when it comes Birthdays or other celebrations so it’s always nice to have some cards ready.

I used to be very productive when it came to cards – always knowing a few days ahead who had a Birthday coming up, so I could mail a card but since the Postal system here in Denmark got screwed up, the postage is so high, that I can’t afford to do this anymore. It doesn’t matter cause nobody can be sure to get the card on time anyways.

So now I only make cards to accompany gifts and I like to personalize them, but it’s also great to have a few quick and easy cards ready….especially when you tend to forget the Birthdays now 😉

So I made some of Simply Crafty SVGs freebie cards to have on hand.

First of is the Layered Bunny Card:

Påske kort 1

This is such a cute card and very easy to make. I added a few extra layers as I wanted to make it in colors of the rainbow – but in pastels to fit the season.

I used AC Cardstock and a piece of black shiny paper for the face.

I accented the eyes and eggs with a white Sharpie Pen, wrote the sentiment with Sketch Pen and used a few Pop Dots on the label.

I used the cut out bunnies to make a matching Gift tag and added eyes, nose and a burlap butterfly.

Påske til og fra 1

Next is the Layered Cross Card: (freebie through April 5th.)

Konfirmationskort 2

This one will be brilliant for the upcoming Confirmations – though they seem to be held in Autumn this year to the Covid-19 Virus.

I used AC Cardstock i different shades of blue and for the top layer, I used an Embossed piece of Paper from DCWVs Stack Embossed White and inked the edges slightly.

Then I added the sentiment, which I wrote with a Sketch Pen, using Pop Dots for dimension.

I also made a Gift Tag from the cut out crosses and added some enamel dots, stickles and Glossy Accent for added interest.

Kors til og fra 2

Finally I made the Pitcher of Flowers Card:

Boks kort 3

This isn’t a freebie but if you hurry, it’s still on sale

I really love this card. It’s so beautiful with the beautiful flowers and leaves and the possibilities are endless when it comes to picking colors and papers.

I chose the gorgeous patterned paper from Graphic45s Nature Sketchbook and matching AC Cardstock.

I couldn’t find a red to match that of G45, so luckily I had the extra Pattern and Solids Pad that I used for one of the flowers.

I also added a bit of Stickles Glitter Glue to some of the berries.

Boks kort 2

As flower center I used some wooden dots from my stash. As you can see on the picture below, I only glued down the stem of the leaves in order for the leaves to be more dimensional.

Boks kort 1

Now I know this one is going to be a huge success and won’t be the last one I make for sure.

Now I’m a bit more prepared to the upcoming Celebrations here in April – I really hope I don’t forget them 😀

Thanks for joining me today – please, as always, leave a comment below.

Flower Gift Bag

In these crazy Corona/Covid-19 virus times, most of us are “forced” to stay at home and this can certainly be a challenge for some. Not for me. This is just what I usually do. I’m not a social butterfly irl but I love to socialize online though 😉

The trick for me to be able to stay at home without going more mental than I already am, is crafting and these days it seems like it more legit to do so. I don’t have to go to bed early so I can get the kids to school in the morning and I can’t go to the Gym (not my favorite thing in the world but somethings are just a necessity). Luckily I’m a craft supply hoarder so I got everything I need at hand. Yay.

It can be difficult to decide on what to make next but the last couple of months it hasn’t been a problem for me due to Design Team projects, favors, gifts etc. Also I like to participate in Challenges. To test myself and to get better at what I do.

Yesterday I posted the latest challenge I entered – the “Stack-a-holic Challenge” on DCWV’s Facebook Page. Today I want to show you my entry in their “Quick-Challenge” on Instagram.

The assignment was to make any flower-themed project made mostly with DCWV products. I used some time to think about what to make but fairly quickly I settled on the cute and pretty Framed Panels Bag from SVGCuts’ Bunny Trail Bags.

DSC_0001

This gift bag is great for many occasions mainly because you can decorate it with different images on the front – like these cut-outs I did or maybe you could use pictures of the recipient.

I used the “Watering Can” stack from DCWV and used the sentiment cards in the stack for the front panel.

As the theme was flowers I chose to cut out some Asters from the Harvest Mail kit also from SVGCuts. They match the flower on the patterned paper perfectly. I dotted the flower center with Gold Stickles.

DSC_0003

I used the same stack for all sides of the bag….

…..the sides:

DSC_0005

and the back:

DSC_0008

Finally I used some Tim Holtz boxwood wire as a handle and I was done.

DSC_0004

Now it’s ready to be used for the next perfect occasion….that is when this virus nightmare is over….but it’s always nice to have stuff on hand.

I would really love it if you would go here on Instagram and vote for my entry in the Challenge. You vote by clicking YES to my picture. You need to click on the DCWV story/logo to find my picture to vote. Just click YES 🙂

I really want to win (duh who doesn’t) as the prize is a new DCWV stack and these are not accessible in Europe….yet anyways.

Thank you so much for visiting today and thanks for voting. Join me again soon as I have a DT project for the Coffee Beans Design Team coming up next week 🙂

Bunny on Cloud Nine

I’ve been looking forward to today as I can now reveal that I’m a new member on the Coffee Beans Design Team. I am very excited to be here and hope to bring something new and fresh to the team if possible.

Today I want to start out with not one…..not two…..but three projects I made with the darling digi stamp Easter Bunny Hot Air Balloon from Bugaboo Stamps.proud sponsorBugaboo

For all three projects I used the trace and the offset options in my Silhouette Studio software and print and cut the images. Then I colored them in by hand.

First of is a cute 3D picture:

Billede

This cute picture is one I found in the Silhouette Design Store design ID #141563 (by Daniela Moscone) and it’s made from AC Cardstock.
I simply switched out the ballon with the digi stamp that I’ve colored in with Promarkers.

The frame is given extra dimension by using foam tape and the bunny plus the little piece of cloud is secured with 3D dots.

Next is an Easel Card:

Easel kort

This card is also one I found in the Silhouette Design Store Design ID #57245 (by Lori Whitlock) and it’s also made from AC Cardstock.

The background is a print and cut that fits so well with the stamp.

I colored in the stamp with Sharpies and pop-dotted a small cloud on the right.

A very easy and fun little card for someone special.

Finally I made a Gift Card Gift Bag:

Gavepose

This is also a Silhouette Design Store fil – Design ID #162508 (by Lori Whitlock) and this too is made from AC Cardstock + some acetate.

This little bag is also dimensional as the bunny kinda floats inside in a little scene. Candy can be put in there too for more fun. Behind the bunny is a little insert/pocket for a gift card. The little cloud on the outside of the bag, is adhered with a pop-dot.

This time I also used Promarkers to color in the bunny and I do find these easier to work with.

So these are my three projects using the same digi stamp.

This is deff.  some what out of my usual way of paper crafting but I do love a challenge. What do you think? Which one is your favorite?

Thank you so much for joining me today – hope to see you again tomorrow ❤

Eggs-Quisite Eggs

Last year, I went crazy around Easter and made SO much Easter decor that not a single place in my house is vacant – so this year I thought I’d cool it a bit 😉

Didn’t really plan on making anything BUT then one after another started popping up – gorgeous, darling and delicious Easter Eggs. So I thought: What the heck – I can always give them away…..that is if I can part with them.

So I made 4 different Easter Eggs. This might just take a while – so go get a nice cuppa, maybe a cookie or a biscuit and get comfy 😉

I usually stay pretty loyal to a paper pack when making a project like this but this time is going to be different. I want to flaunt some of the amazing papers outthere 🙂

Starting with the cute and somewhat different Hollow Easter Egg from Simply Crafty Svgs:

DSC_0018

This is made from AC Cardstock in Vanilla and decorated with Bloom patterned paper from Graphic 45.

DSC_0020

I found a vine in the Silhouette Design Store design #26976 (designed by Jennifer Wambach) and added several Prima flowers and some gems onto the egg as well.

Then I raided my stash for something cute to put inside on the ledge and found several Tim Holtz items that does the trick – gives it a spring-y and natural feel to it.

I also played a bit with the egg design and made another version without the ledge:

DSC_0021

This is also made from Vanilla Cardstock and Bloom papers.

The vine around the hole is made from design #126611 (designed by Sophie Gallo) in the Silhouette Design Store and the vine inside the egg is design #7320 (designed by Samantha Walker) from the same store.

DSC_0023

Then I embellished with several Prima flowers, a few gems and a LED light – Voila!

DSC_0026

Find the tutorial to the egg here.

DSC_0014

Next is the Gouden Ei (Golden Egg) from Creatieve Papier Uitspattigen:

DSC_0012

This is made from White AC Cardstock and decorated with patterned paper from DCWV’s Unicorns & Rainbows collection + gold glitter paper from Vivi Gade.

This is one of their easier designs and it goes together perfectly and easily but with help from the Video Tutorial.

I added pieces of a rhinestone chain, from my stash, onto the egg with hot glue and embellished with a Prima butterfly.

DSC_0010

This is a box and opens up by lifting the egg shell – room for lots of chocolates 😀

DSC_0010

Then I made the Egg 3D Form Multi Diamonds from Jodi Warner/Snapdragon Snippets found the Silhouette Design Store design #291232:

DSC_0006

This is a closed egg and is designed to either stand alone or be made with a small stub so it’ll fit in the candle stands that Jodi also designed – I decided that I wanted it to stand alone. Find the tutorial here.

I used AC Cardstock in White for the egg itself and decorated with glitter paper in various colors for a kind of Harlekin effect.

I also added some small and large rhinestones as embellishments and topped it all of with a Prima butterfly.

I regretted that I hadn’t made it with the stub, so I might make three new eggs like this and decorate my candle stands.

Finally I made the Eggs-Quisite Gift Box from Dreaming Tree:

DSC_0012

This elegant gift box is part of a bundle – Easter Time – with several adorable Easter projects. Find the tutorial for the egg here.

I used AC Cardstock in White, Rosebud, Olive, Scarlet, Peach and Plum along with patterned paper from Prima’s Lavender Frost Collection, Rose Gold Mercury Glass Paper from DCWV and Rose Gold glitter paper from DCWV.

I found some bling-y ribbon/chain and added it with hot glue and topped it all of with a pearl embellishment from a Hat Pin.

This one will also hold an insane amount of chocolate so you might want to fill it with a bit of tissue paper before filling it 😉

DSC_0016

So that is what I made for Easter this year – don’t really know if I can part with them….we’ll see 😀

Thanks for sticking with me through this rather long post (so sorry) and please remember how excited I get when reading your lovely comments below 😉

Happy Easter ❤

 

 

 

Little Red Easter Wagon

Hello and Happy Monday…..Happy Spring and Happy Easter 🙂

Today I want to show you a small and very easy but adorable project I made using the Little Wagon file from Simply Crafty Svgs.

DSC_0004

It’s made from AC Cardstock in Crimson, Black and White and I decorated the wheels with small red dots from Simple Stories.

It’s unbelievable easy to assemble and it even has it’s own tutorial video.

I decorated mine for Easter with some chocolate eggs and flowers from my stash but I can imagine lots of other purposes for this cutie – like a place card for a kid’s Birthday (downsized to 75% or 50%) or maybe for Halloween with a skull or a pumpkin in it.

Thanks for joining me today. I really appreciate you stopping by and would love it if you would leave me small comment below – maybe with more fun ideas on how to use the file?

Happy Easter ❤

Easter Basket

Each year – or almost each year 😉 – I make some small Easter treat holders for my nephews and niece. This year will be no different.

I seek out something I haven’t made before and this year I’m making the adorable Easter Basket from Simply Crafty Svgs:

DSC_0004

This basket can be made by anyone (with a digital cutting machine of course) – it is so easy to assemble. The hardest part is choosing the paper 😉

I made it from AC Cardstock in Vanilla and decorated with patterned paper from Graphic 45’s “Sweet Sentiments.” All edges are inked with a light brown Distress Ink pad.

I also found some small flowers in matching colors in my stash…..

DSC_0005

…..and added a little cute picture inside the basket, that shows when the eggs are eaten.

DSC_0008

Luckily I was able to find chocolate/marzipan eggs in matching colors too 😀

I hope this year’s treat with bring joy as the others did – this crazy aunt just loves to spoil those kids….Ehm…young adults 😉

Here’s a 360 view:

Thanks for stopping by today 🙂 I really hope you’ll leave a little comment below and that you’ll visit soon again. I’m just getting started 😉

 

3 X 3 = Hygge

What is “Hygge”?

Hygge is a Danish word for coziness – for snuggling under a blanket, being with friends or Family or maybe just being yourself watching your favorite series in candle light, cuddled up in a warm blanket ❤

Hygge is definitely what comes to my mind when I see candles – being real or LED – and that is exactly what I’ve been working on for the last week. Not just one but 3 😉

Not just candles – they have to have something to stand on, so I made 3 candlesticks too.

Not just candles and candlesticks – I added a ring of leaves – or should I say 3.

Enough yapping – here they are:

dsc_0005

Candle 3D Chunky with Drips rests nicely on the Candle Stand 3D for Display with a alternated Candle Ring 3D Evergreens sandwiched between.

Let me start with the candle ring, as I made it somewhat different than the original.

dsc_0011

It’s made from AC Cardstock in Leaf and Kale.

I used my Silhouette software to remove the Evergreen sprigs from the ring and add Leafy Sprigs instead as I wanted a more Springy feel to the project. It’s all about daring to use different features in the Silhouette Software (I bet lots of other cutting software offers features like this) like Make or Release “Compound path”, Welding or editing Points. All in all just play around – you can’t fail cause you can always go back.

Then I made the Candle in AC Cardstock Caramel and inked the edges with Distress Ink in a light brown shade. The candle sure is easy to make! You just have to have your pieces organized.

dsc_0007

Finally I made the Candle Stand or Stick in AC Cardstock Vanilla and inked the edges with the same Distress Ink. This is also very easy to make and it is so sturdy!

dsc_0013

That’s it – times 3. Ready for Spring, Easter and Summer. You could add flowers to the rings for more decoration – I just like them the way they are.

Thanks for joining me today – please let me know what you think of this project in a comment below and have a super cozy Sunday.

New to SVG Attic? Check out these awesome places!

Springtime Bouquet

Hello again 🙂

Just popping in for a quick little post on the cute Spring-y flower bouquet I made last night 🙂 The flowers being from the devine bundle from Dreaming Tree Alluring Florals.

DSC_0003

I was going for only making the Gardenias, but it got too white and neutral for my taste, so I made some more flowers to make a small but very cute bouquet and put it in a Mason jar. Then I tied some hemp ribbon in a bow on the jar.

But to start with the Gardenia:

DSC_0004

It’s made from AC Cardstock in White, Pine and Mint. I didn’t chalk the flower petals but only the stems and the leaves.

This is by far the easiest of all the flowers to make 🙂 Imagine a whole bouquet of them as Wedding Bouquet ❤

To make this bouquet extra Spring-y I decided to make a Daffodil too and I used the one from the Daffodilly Spring bundle.

DSC_0006

I used AC Cardstock in Banana, Melon and Spinach for this Daffodil and inked all the edges with Ingvild Bolme Chalk Ink 🙂

To mount it on the stem, I just used the same technique as for the rest of the flowers 🙂 – that went surprisingly well 🙂

The rest of the flowers are the same as for the Floral Arrangement I posted yesterday but here are some pictures of the ones in the bouquet 😉

I really hope you like this as much as I do – maybe I’ll give that Wedding Bouquet a spin in the future 🙂 I think that’ll look awesome.

Thanks for joining me today – please do leave me some love in a comment ❤