Good Night Santa

As I promised, here is my last Christmas post this year and I need to do this a little quick, because I need to finish making tomorrow’s dessert today.

Ok….I made one of the older files this time, namely Santa’s Arm Chair Box from the JGW Santas Repose kit:

DSC_0001

I simply couldn’t shake the vision of Santa coming home after a busy night delivering presents and being exhausted, just wanting some quiet time in his chair in front of the fireplace.

The chair is made from AC Cardstock in Pomegranate, Cranberry and Vanilla along with several pieces of patterned paper from “St. Nicholas” by Graphic45 and two shades of green Pearl paper.

I used two ball chains to hang the Santa sign onto the chair.

I wanted to make a footstool too but ran out of time – but I imagined making one with the Candle 3D Stand 3 Inch Pillar just downsized and maybe altered a bit – oh well some other time.

DSC_0008

Santa’s hat is from the Santa Clause 3D Canister in the JGW Winter Friends Canister kit and the stocking I snatched from the Stocking Trio A6 Card that I found in the Silhouette Design Store design ID #88698. I just added some Stickles Burgundy glitter glue to the top and bottom for a little extra detail.

DSC_0006

They are made from AC Cardstock in Vanilla and various patterned papers from the “St. Nicholas” Collection.

DSC_0002

There….I kept it short for once 😀 Now it’s dessert making time and then onto wrapping the last gifts – then I’m all set for celebrating Christmas tomorrow night (we do the whole eating and gift giving on the eve of the 24th. here in Denmark)

Happy Holidays to all of you – whatever you’re celebrating and I hope you’ll have wonderful couple of days of rest, relaxation and maybe…..just maybe….a little time to sneak of and craft a little 😉

New to SVG Attic? Check out these awesome places!

 

 

Advertisements

Christmas Season

Hello and welcome to my blog – welcome again if you’ve been here before 😉

This Christmas I’ve been very busy making paper projects for DT blog posts, so there haven’t been much time to make anything else.

But I made time! This post is about some of the things I just had to make for myself.

I do have a HUGE stash of Christmas paper but I seriously fell in love with one particular series this year: Christmas Season from Maja Design. So that is what I’ve been using for all of the following things I made and with coordinating colors of AC Cardstock.

To kick this off, I made the seriously adorable Gnome from Simply Crafty SVGs….or rather Gnomes:

DSC_0010

These are downsized to 75% and they are to go on my Christmas Dinner Table this year. They are just so darn cute!

I used a Sizzix embossing folder for the hat brim and some tiny pom-poms on the top of the Hat.

Here a better look at the paper on the body/booty 😉 :

DSC_0007

Next I made the freebie Victorian Treat Cone from Dreaming Tree:

DSC_0014

For the handle I used Pine Twine from Tim Holtz Ideaology and tree small holly leaves from Prima. Then I decorated with some red gems from my stash.

It’s kinda hard to see, but I made a little change on the curved part of the cone as I took the snowflake and stars from the Let it Snow Pop Up Card from the Tis the Season Pop Up Card Bundle also from Dreaming Tree and added it to the cone. I properbly should have added some contrasting paper behind to make it more visual.

DSC_0018

Then I made the gorgeous Snowflake Bag from the Toy Land SVG Kit from SVG Cuts:

DSC_0012

The bag is downsized by 50% and is still pretty large so just imagine what a large gift you can put inside if you make it in the original size!

The center snowflake is made from White Glitter Paper from Best Creation and the handle is Red Tinsel Twine from Tim Holtz.

It might look difficult to make but boy was it easy ❤

Finally I made the stunning Toy Soldier also from the Toy Land SVG Kit:

DSC_0002

This handsome fellow is also downsized by 50% and that makes it a bit more challenging to make. There are a few oopsies here and there but nothing too grave and I think I hid it quite well.

I used Scrapper’s Floss for the boots and a red gem from my stash for the hat ornament.

I didn’t only make one Soldier – I made two and they are also going on the dinner table for Christmas Eve.

DSC_0004

See it’s not indifferent how you place the arm on the Soldier – it kinda has a large impact on the whole project. Oh well – they don’t get to stand next to each other anyways 😉

I had a lot of fun with these projects and now the table is set for Monday the 24th. 🙂 I only have one more Christmas project to show you this Sunday and then it’s time to turn the attention to something else. Taking a rest is not an option for me LOL 😀

Thanks for joining me today – hope to see you Sunday ❤ and please leave me a comment below.

 

 

 

Going Out with a Bang

Hiya! I’m so glad you’re joining me today. This is my last blog post for Simply Crafty SVGs this year and I’m going out with a bang…..so to speak 😀

I decided that event though New Years Eve is still some time away, I wanted to show you the cute little lanterns I made for the occasion.

First of is the Rockets Bursting Tealight Holder:

DSC_0024

Designed for the 4th. of July, I decided to make it for New Years because here in Denmark we celebrate the new year with lots of fireworks. Every home with respect for itself, buys a ton of rockets and fireworks and shoots off the the New Year at midnight. So what more fitting than some sparkly decor with rockets and stars?

I downsized the holder by 50% and used AC Cardstock in White along with AC POW Glitter paper in Black, Silver and Gold. I also added some vellum behind the rockets.

Since it’s small, I left out the insert and placed to LED tealights inside and just look at that glow!

I also made the freebie 4th of July Tealight Holder:

DSC_0018

This one is also downsized by 50% and I also used AC Cardstock in White along with AC POW Glitter paper in Black and Silver.

I did use some of the left over stars + a few that I made to decorate the side with the star burst and added vellum behind the cutouts. Isn’t it darling?

Here’s the entire project:

DSC_0020

Yes I so ready for New Years – usually such a fun night 🙂

Thanks for joining me today. I hope you’ll have a very Merry Christmas and a lucky and happy New Year. See you in 2019 ❤

Christmas Time

I want to show you what I’ve been up to this past week. It involves these:

tim-holtz-dimensional-domes-shakers-pic_large

I fell in love with them instantly and knew exactly what I wanted to used them for.

Christmas Tags for this years presents!

I used the Tag Thanks Latte and stripped away everything but the scalloped base and the inside circle.

DSC_0002

I didn’t feel like making a very detailed tag because I felt the dome, the glitter and the small image inside the dome was details enough.

I used DCWV “Christmas Plaid” paper and Tim Holtz Ideaology Gold Kraft-Stock for the tag.

Inside the dome is a print and cut motive of pinecones with branches from Carta Bella’s “Let it Snow” collection along with Diamond Sugar Dust from Craft Décor.

I embossed and sanded the gold paper for effect and used gold twine to tie it unto the presents.

DSC_0004

And I didn’t stop here…..

I was on a roll with these domes and decided to use them for this years place cards for the Christmas Table:

DSC_0008

The place cards are the JGW Snowflake Placecards.

They are made from Kraft Cardstock, Ideaology Gold Paper, white pearl paper and Best Creation White Glitter Paper.

Inside the dome is a print and cut from Carta Bella’s “Christmas Delivery” collection and Diamond Sugar Dust from Craft Décor. I also wrote “Merry Christmas” in Danish.

DSC_0016

Instead of using a candy inside the tag, I used snowflake printed vellum to write the names and decorated with a border of a snowflake circle (design ID #34350) I found in the Silhouette Design Store.

Then, for a fun detail, I placed a small led light inside the tag:

DSC_0013

It’s a bit hard to see in the picture, but it really lights up the name nicely.

As a final detail, I tied some gold tinsel on top of the place card.

And there….I’m all set for Christmas now.

Thanks for joining me today. I’m back again next Sunday for a final Christmas project.

New to SVG Attic? Check out these awesome places!

Bells Will Be Ringing

Last Sunday I showed you some 3D Christmas ornaments I’d made and that kinda kick-started my brain to come up with some more.

I really enjoy making ornaments because I get to play with all my Christmas papers, get glitter all over the place and get to watch the beautiful ornament that I made on our Christmas Tree.

This Spring, SVG Attic released a kit called Liberty Lane and in this kit, you will find a 3D Liberty Bell Box that is perfect for 4th. of July but also for Christmas.

DSC_0010

To make it into a Christmas Bell, I omitted the Yoke and used the panels without the crack.

I made two bells and they are downsized by 50%. I used the Bow 3D for Large Package that I also downsized by 50 % and the Sprigs from the Pine Sprigs Window A7 Card (also downsized but only slightly)

The Bells are hot glued together at an angle. I tied some gold twine onto the middle of the Bow and then added the Bow and Sprigs also with hot glue.

The Bells are made from AC Cardstock in Vanilla and Gold Glitter paper from Artemio. The Bow is made from patterned paper from Graphic 45’s “St. Nicholas” and the Sprigs are made from green pearl paper.

Finally I also added two small gold Jingle bells at the bottom of the bells.

A very cute addition to my ornaments if I may say so myself 😉

Thanks for joining me on this 2nd. Sunday of Advent. I hope the rest of your day is filled with Christmas “hygge” ❤

Happy Birthday Jodi

New to SVG Attic? Check out these awesome places!

Star Shine

Winter is coming…or already here. This means it’s dark in the morning and dark early in the afternoon – at least here in Scandinavia.

It’s also Christmas time and the old pagan Winter Solstice feast, that celebrates the Midwinter and the returning of the light.

No matter what you believe in, it’s time to break out the candles and get cozy with their beautiful light. In my house, we don’t use candles of stearin as much anymore. We use a lot of LED candles instead that are better for your health and don’t pose a fire hazard. They are also great to use in homemade lanterns of paper and it just so happens I made such a one to show you today 😉

My choice fell on the 3D Star Lantern from Simply Crafty SVGs:

DSC_0004

This was originally made for the 4th. of July but it can just as well be used for Christmas.

I downsized it by 50% and changed the small firework burst on the sides with a snow flake.

It’s made from AC Cardstock in Vanilla and decorated with patterned paper from DCWV’s “Christmas Plaid” and gold glitter paper from Artemio. I used vellum behind the star cut outs and tied a length of Boxwood Twine from Tim Holtz Ideaology.

It’s perfect for a normal sized LED tealight and it would look awesome if you made several of them and decorated your Christmas table with them – maybe one for each guest kinda like a place card. 🙂

Thanks for dropping by today – please leave a little love in a comment below.

See you again soon I hope.

Dimensional Ornaments

Happy 2nd December – YAY…..we’re officially in the month of Christmas and counting down to the big day/night. And on top of that – it’s 1st Sunday in Advent. Lighting the first candle today 😀

Yeah – I’m still like a kid (in oh so many ways 😉 ) that gets all excited about Christmas. My decorations were up by mid November, we’ve startet on our Advent Calendars (me and the kids) and today is present day. The kids get a present each in their “Stocking” – usually money cause that’s all they want (yes I have big kids now 😀 ).

I have been busy all week making myself some new Christmas Ornaments from SVG Attic and as I’m a nut for Graphic 45 paper, I found all the Christmas collections I had in store and chose out some patterns that would work for this project.

DSC_0011

All of these ornaments are made double sided so it can be seen from all sides.

Ok – let’s get started! First one is the Patchwork 3D Star Ornament from the Just Be Claus kit:

DSC_0025

For this I used AC Cardstock in Vanilla and several patterned paper from Graphic 45’s “St. Nicholas” Then I inked the edges with Distress Ink.

I also downsized the ornament to 75% of the original so it won’t be too big for our tree.

Then I made the Snowflake 3D Six Point Star Ornament from the Winter illuminations kit:

DSC_0060

I also used AC Cardstock for this one in Cranberry and patterned paper from Graphic 45’s “Winter Wonderland.” This too is inked with Distress Ink and downsized to 75%

Next is the Poinsettia 3D Slice Form Ornament:

DSC_0023

This is made from AC Cardstock in Cranberry, Tim Holtz Metallic Paper in Gold, White Glitter paper from Best Creation and patterned paper from Graphic 45’s “A Christmas Carol”

This is downsized by 50% and inked with Distress Ink. I also added a gem to the flower center on both sides.

Then I made the 3D Snowflake with Triangle Points:

DSC_0054

I used AC Cardstock in White and White Glitter Paper from Best Creation.

I then added two glass snowflakes from my stash and glued two snowflake sequins onto those for a little extra.

This one is made in the original size.

Finally I made the Snowflake 3D Slot Form also from the Winter Illuminations kit:

DSC_0061

It is, like the previous ornament, made from AC Cardstock in White and White Glitter paper from Best Creation.

This one is also downsized to 75%

Wow – that was a bit long – sorry about that. Hope you like them despite this and if you do, please leave a little love in a comment below.

Until next time – have a wonderful 1st Sunday in Advent ❤

New to SVG Attic? Check out these awesome places!