Warning: Not for the Faint of Heart!

My last Halloween post – this year. Going out with a bang or maybe a kill….so to speak!

Ever since the Spring when SVG Attic released the Make a Splash kit, I knew what I wanted to do with the 3D Bath Tub.

Knowing my evil, crooked mind, you would too….MUAHAHAHAHA

Halloween of course – but what does a bath tub have to do with Halloween?

Setting the scene: A woman is taking a long hot bath in the tub/shower and is not seeing the figure coming into the room with a knife in the hand – Next thing….she is being stabbed to death and blood spills all over the tub and shower curtain.

Recognize this scene????

DSC_0006

Yes it’s the famous shower scene from the movie Psycho – only a little more graphic since it’s in color.

I really had fun making this and it did take me a while as I had to figure out how to make the shower curtain.

Using my scout-day skills (LOL) I tied some hibachi skewers onto a metal ring and covered it all with black flourist tape.

Then I added the curtain which is made from vellum and folded here and there to give the impression of a hanging curtain.

DSC_0011

The Tub is made from AC Cardstock in Ash and with patterned paper from DCWV’s Spooky and Sparkly collection. I also used Silhouette Printable Silver Foil for the faucets. I created the top shower head myself out of the bottom faucet and some circles I stacked together.

DSC_0012

I then painted the inside of the tub to make it all white and a tiny bit shiny. Once that was dry, I went to town with the blood splatter – using a brush and some red paint. The bloody handprint on the curtain is made from red vinyl.

DSC_0010

The shower mat and the knife are both from the Silhouette Design Store (Knife: Design ID #116580 by Studio Ilustrado and Mat: Design ID #1565 by Silhouette)

DSC_0008

I know this isn’t for the faint of heart, but it was so much fun for me to make and to able to actually create an idea that just pops into my head, is fantastic.

I do hope you’ve enjoyed this bloody project and all the other Halloween projects I’ve made throughout the month. Thank you so much for joining me and my vivid imagination.

Now it’s time to turn my attention towards something else.

New to SVG Attic?  Check out these awesome places!

Haunted Funeral Coach

Hello, Happy Sunday and welcome back – so glad you’re joining me today.

The month of Halloween is almost at an end – Halloween is this Wednesday :-O Not much time to get those last projects done for the big day!

I just had to make this totally awesome Coffin 3D Coach Model that Jodi made. It’s out of this world fantastic!

DSC_0015

It’s made from AC Cardstock in Charcoal, Plum, Caramel and Black.

I used the Rig O Mortise Funerals Vinyl Sign on both side windows. I cut them in frosted vinyl and transferred them onto the acetate with some tape.

All edges are inked with Distress ink in matching colors.

I also made the Coffin 3D Box but I played a bit with it.

DSC_0007

I cut the “RIP” into both the box and the panel and backed it with acetate. I also cut small holes along the sides of the coffin, so light from a small LED light can shine through – giving it a spooky look.

The coffin is made from AC Cardstock in Chestnut along with patterned paper from Simple Stories.

I used most of a weekend to find the Coachman/Undertaker. I simply couldn’t find a sitting skeleton anywhere. So I made him myself by breaking his legs at the hip and knees and glued them on again with hot glue – rather morbid.

DSC_0013

The coffin fits perfectly inside the Coach and looks very spooky at night with the green light oozing out of the holes.

DSC_0009

It would also be awesome as a table centerpiece for your Halloween party – filled with treats and the coffin is also perfect for yucky Halloween candies.

DSC_0005

I hope you’ve enjoyed the Coach – please let me know in a comment below and please join me again one last time before the BIG day!

New to SVG Attic?  Check out these awesome places!

Ghostly Candle Sticks

Hello – yes it’s me again.

Just popping in to show you these awesome new Candle Sticks/Candle Stands 3D for Display that just recently released in the SVG Attic store.

I made all three sizes and they are very easy to make. Only took me an afternoon to make these and just look how cool they came out:

DSC_0014

They are all made with just Black AC Cardstock and inked with Ingvild Bolme White Chalk Ink.
I decorated them with some bows made from Ideaology’s Mummy Cloth and added some acrylic balls in which I added some spooky images made from Printable Acetate.
A tribute to my all time favorite series – Supernatural:
DSC_0016
A spooky Skull:
DSC_0018
…and a spooky eyeball:
DSC_0020
I got the idea for the balls from a craft video I saw on Facebook and thought that they would work wonderfully on the displays.
Thank you for joining me for my little blog post today – I’ll soon return with more spookiness.

Too Cute to Spook

I’m back! Halloween is my month and I’m about to show you something that I normally do not make – cute Halloween!

I just couldn’t help myself – Jodi didn’t make it easy for me….ha ha

Just look at this adorable Ghost 3D Cubic Luminary. Isn’t it just the cutest?

DSC_0006

I chose to make faces for the light to shine through on all 4 sides. There are 3 options that comes with the file but I took one of them and just turned the mouth around and voila – a 4th. option.

The Lantern is made from Vanilla AC Cardstock and the faces are backed with golden Vellum.

I inked all edges with a light brown Distress Ink and made the handle with some gold wire from my stash.

Finally I tied some ribbons onto the handle as a final touch.

But I didn’t finish with this one – I had to make the cute Cat 3D Head Model with Rosette (left out the Rosette) on top of the Box 3D Ten Sided with Lid Doily.

DSC_0008

We are cat lovers in our house with three fur babies and this one actually kind of looks like Quark – our huge grey Maine Coon.

It’s made from AC Cardstock in Black, Apricot, Key Lime and White along with Bazzill Bling Cardstock in a dark grey and patterned paper from Tim Holtz.

I left out the tongue and wanted to make some fangs to make him look a bit more spooky, but it didn’t work out so I left him like this. Looks like our lazy cat.

I used some black and white twine as whiskers and tied raffia around the neck with a bow.

Aren’t they both cute. Just the thing for the kids

Thanks for joining me today – I’ll be back soon!

New to SVG Attic? Check out these awesome places!

SnapDragon Snippets 

SVG Attic Facebook Page

SVG Attic Fanatics Facebook

SVG Attic Blog

SVG Attic Pinterest

Tombstone Treat Boxes

Hello 🙂

Just popping in today to show these adorable and …. yes….cute….Halloween Tombstone Boxes from PaperClosetDesigns. So great for the kiddos Halloween party or as fun treat give-aways at school. Or how about making a bunch of them and hand them out to all the Trick or Treaters?

DSC_0033

As you can see, they come in three sizes and for this project I sized them down by 50%.

DSC_0023

For the smallest box, I used AC Cardstock in Charcoal and Black along with Doodlebug patterned paper – “Pumpkin Party”.

I found the Doodlebug sentiment in the Silhouette Design Store: Design ID #225981 and used the Print and Cut feature in the Silhouette software.

Finally I decorated it a bit with some Star Sprinkles also from Doodlebug Design.

DSC_0027

The medium box is made from AC Cardstock in Charcoal and Black along with Doodlebug Design paper – same as above.

I also used the Print and Cut feature with the Spooky sentiment: Design ID #154771 and decorated with two black dots for eyes.

DSC_0031

The large box is, as the two others, made from AC Cardstock in Charcoal and Black and decorated with Doodlebug Design Paper.

The print and cut Trick or Treat sentiment is also from the Silhouette Design Store: Design ID #229094

All three are very easy and simple to make and assemble so it’s a breeze making lots of them.

Thanks for joining me today – please let me know in a comment if you find these as cute as I do. ❤

Luminary Skull

Hello – yes it’s me again.

Gosh I love this time of year!!! I get to use my wicked twisted brain to come up with some diabolic, evil looking projects.

Yes, I believe that Halloween should be scary and not cutesy. Not that there is anything wrong in cutesy projects for the kiddos, but when they reach a certain age (like me…29 😉 ) cutesy just isn’t fun anymore.

I always look for ways to make projects look creepy – the creepier the better 😀

That’s what I did to this awesome Skull Head Candle Holder from Simply Crafty SVGs – just added a bit more scary than was already there to begin with.

DSC_0003

For this I used AC Cardstock in Black, White, Rouge and Chocolate along with patterned paper from Tim Holtz and some Grey Bling Cardstock from Bazzill.

I embossed the Skull panels with an Embossing folder from Sizzix (also a Tim Holtz I think) and inked all the edges with Distress Ink. I also added some black gems onto the skull layer on the bottom.

I added vellum behind the openings in the Skull and made the blood dripping down or Stearin drips myself. All I did was enlarge the dripping portion of the candle, cut away the top and some of the tabs and cut the pieces out (using scissors) a the scor lines. Then I glued the pieces onto the top of the skull using the top tab and voila!

I made the Bloody Hatchet in 50% of the original size and cut a small slit in the vellum behind the cracked panel on the Skull, so it could fit in there. I haven’t glued it down.

I know the skull isn’t too scary in the daylight but at night…….

DSC_0021

…..Woah!!! :-O

Here’s a little fun video I made:

 

Thanks for joining me today – I hope you like my version of the Skull Head – tell me in a comment below please ❤

Mad Hatter’s Mourner’s Hat with a Twist?

Hello – I’m back again this Sunday with more Halloween spookiness. This time from SVG Attic.

I really can’t decided whether it’s a Mad Hatter’s Hat or a Mourner’s Hat. It’s definitely a hat!

I wanted to make the Mourner’s Hat from the JGW Raven Quest kit this Halloween but as I progressed, the project changed due to my hyperactive brain. “I wonder if this can be done…..?” “Hmmmm can I do this…..?”

The answer: Yes! I did it. Presenting the Halloween Mad Hatter’s Mourner’s Hat with a twist:DSC_0006

The hat is made from AC Cardstock in Black and Charcoal and inked with Ingvild Bolme Chalk Ink in White.

I made the panels and the little shelves myself with the Silhouette Software. The Panels are embossed with a Bark patterned embossing folder from Darice.

DSC_0007

I made small holes in the back of each shelf for the light to shine through.

I added a scratch mark in one of the panels and backed it with vellum – also for light to shine through. I found it in the Silhouette Design Store Design ID #118964 by Sophie Gallo.

DSC_0008

Then I got busy decorating the hat with all sorts of nick nack Halloween style I could find in my stash.

DSC_0005

The flowers are from Prima, several of the decor pieces are from Ideaology  and the gem swirls are from BoBunny.

I wrapped “Mummy Cloth” around the hat as a band and also around the bow.

One of the most awesome feature, is the Zombie Hand that holds the lantern. It’s also from Ideaology and I love it to bits….It’s so cool.

It’s pretty creepy in the dark:

DSC_0018

How about a video??? :-O

…..and a night shot….. :-O

 

So what do you think? Let me know in a comment below and I’ll see you soon – thanks for joining me today.

New to SVG Attic?  Check out these awesome places!

Haunted Lantern

Hello and welcome back – yes it’s me again. Did I mention that I really love Halloween????

Ha ha once or twice maybe. Yes I love it and I love spookifying everything in sight.

This time it happen to the amazing Lantern 3D Hanging Floral Grille from the Pushing Petals Kit

DSC_0002

It’s made from AC Cardstock in Charcoal and Rouge along with some Bazzill Bling Cardstock in a light grey.

The blood border and bloody handprint are from the Silhouette Design Store (Design ID #223575 by Sophie Gallo and Design ID #98189 by Jamie Cripps)

The flowers are from Prima – some single ones that I just put together how I liked and the brads are from my rather large stash.

DSC_0004

The Cameo, spider and burlap bow are from Ideaology by Tim Holtz and the spider web is available everywhere these days I think LOL…..

It’s a very easy but detailed lantern to make – not that large but that’s how I like it. It looks awesome in my kitchen with some of my other Halloween decorations.

Thanks for stopping by today….more coming up soon so stay tuned!

New to SVG Attic? Check out these awesome places!

SnapDragon Snippets 

SVG Attic Facebook Page

SVG Attic Fanatics Facebook

SVG Attic Blog

SVG Attic Pinterest

Poison and Potion

Happy Sunday and YES! It’s October….the month of Halloween – my favorite time of year.

I just love to decorate my house for Halloween. The kids are getting older and they don’t care as much for Halloween as the Evil Queen of a Mother, but I don’t care. I decorate for me and whom else that like it.

I also enjoy making the decor myself and find it especially fun to Halloweenify ordinary files into something creepy.

That’s what I did with the following bottles: The 3D Love Potion Bottle from the JGW Cupids Aim kit, the Myrrh Bottle from the JGW Gifts for the King kit and the Love Potion Bottle:

DSC_0006

For these spooky potion and poison bottles, I used AC Cardstock in Black, Plum, White and Apricot.

All edges are inked with Distress Ink and White Chalk ink from Ingvild Bolme.

I made some panels for the large bottle embossed it with a Swirly Embossing folder from Sizzix.

I also made these bottles into luminaries. I cut some different shapes (from the Witches High Top Boot from the JGW Bewitched Botique kit, Scratch Marks Design ID #118964 in the Silhouette Design Store along with the Skull Design ID #20905) Then I glued vellum behind the cutouts and finally I decorated with gems and various trinkets from my stash.

I found some cool strings of LED lights designed for bottles and used these in the large and small bottle. For the medium bottle I dropped in a color shifting LED light.

DSC_0017

Now they are part of my spooky Halloween decorations in my living room and the truth be told….I think the kids like them.

Here a fun little video I made:

 

Thanks for joining me today – I’ll be back soon with more spooky Halloween projects.

New to SVG Attic? Check out these awesome places!
SnapDragon Snippets
SVG Attic Facebook Page
SVG Attic Fanatics Facebook
SVG Attic Blog
SVG Attic Pinterest

 

Horrible Cake

Halloween is sneaking up on us and will arrive before we know it…..so it’s best to be prepared and get those decorations done.

It’s my favorite time of year – Honestly – I think Halloween all year long. When I see a new kit or file, my first thought is: Can this be Halloweenified?

The files I’m using for the project I’m about to show you, could!

Imagine Morticia Adams in the kitchen, baking a Birthday cake. Wouldn’t be just any normal cake now, would it? Nahhhh I imagine it something like this:

DSC_0015

A moldy cake with bloody filling topped with spiderwebs and naturally an axe to chop it up into fitting pieces. Served on a creepy stand with blood dripping down over the edge.

DSC_0011

I know I have a vivid imagination, but I couldn’t help myself (again)

I used several Simply Crafty SVGs files for this one – namely the Cake Slice Box (downsized by 50%) , the Bloody Hatchet (downsized by 25%) and the all new Cake Plate/Display Stand (Made a bit bigger to fit the scale)

I used AC Cardstock in Black, Rouge, Chocolate, Melon and Leaf along with patterned paper from Authentique’s “Tricky” Collection and some grey Bling Bazzill Cardstock.

I also used a Swirly Embossing folder from Sizzix to emboss the panels on the foot of the stand.

The blood splatter on the stand is a design from the Silhouette Design Store (Design ID #97008) by Sophie Gallo.

The cake slices (I made 8 for a whole cake) opens up so you can put some treats inside. I was thinking about using this as place cards, where people just find their own name and sit where ever they want to 😉

DSC_0006

All of this is so easy to make and decorate – just let your imagination run wild!

That was what I wanted to share with you today – stay tuned for more creepy, bloody Halloween decor as we get closer and closer to the scary but awesome Halloween.